This product was not featured by Product Hunt yet. It will not be visible on their landing page and won't be ranked (cannot win product of the day regardless of upvotes).
Product upvotes vs the next 3
Waiting for data. Loading
Product comments vs the next 3
Waiting for data. Loading
Product upvote speed vs the next 3
Waiting for data. Loading
Product upvotes and comments
Waiting for data. Loading
Product vs the next 3
Loading
QR3D Craft
Turn any link into a QR code you can actually 3D print
Most 3D printed QR codes fail for one reason: the squares are smaller than the printer can draw. QR3D Craft sizes them for your nozzle and gives you a 3MF with the base and code already split into two colours. Free, no sign-up, runs in your browser.
I built this because I kept seeing 3D printed QR codes that nobody could scan, and the reason was never the one people blamed.
A printer lays down a line of plastic about as wide as its nozzle. For a module - one of the little squares - to come out square instead of as a blob, two of those lines have to fit inside it. With a 0.4 mm nozzle that means 0.8 mm per module, and for a normal URL that means a piece of at least 30 mm. Make it smaller and it will not scan, no matter how good your printer is. Most generators will happily hand you a file that cannot work.
So QR3D Craft asks what you are printing with, and sizes the piece around that. You get a 3MF with the base and the code as two separate objects with their colours already assigned, so a multi-material printer prints it straight, and a single-extruder printer only needs one filament change. STL too, if your slicer prefers it.
Three things I care about:
It is free and there is no sign-up.
Nothing is uploaded. The encoder, the geometry and the 3MF writer all run in your browser - if you disconnect after the page loads, it keeps working. The link you type never leaves your machine because there is no server to send it to.
I wrote the encoder from scratch rather than pulling in a library: versions 1 to 40, the four error correction levels, Reed-Solomon, and all eight masks scored so the best one wins. It is on GitHub under MIT, together with an STL writer: github.com/matiehl97-byte/qr3d
There is also a free test kit - six tags with the same code at six different sizes, about 35 g of filament. Print it once and the smallest one that still scans is your printer's limit, which is the only number you need to size any QR piece you ever make.
Where this came from: I am in Chaco, Argentina, and I wrote the whole thing in Spanish first, for the small businesses around me that want a QR on a desk stand and have nobody to ask. The English side - the tool and all thirty-five articles - is the same pages translated by hand, not run through a translator. If you hit a sentence that reads like a machine wrote it, tell me which one and I will fix it.
Happy to answer anything - especially about the geometry, which turned out to be the interesting part.
About QR3D Craft on Product Hunt
“Turn any link into a QR code you can actually 3D print”
QR3D Craft was submitted on Product Hunt and earned 0 upvotes and 1 comments, placing #270 on the daily leaderboard. Most 3D printed QR codes fail for one reason: the squares are smaller than the printer can draw. QR3D Craft sizes them for your nozzle and gives you a 3MF with the base and code already split into two colours. Free, no sign-up, runs in your browser.
On the analytics side, QR3D Craft competes within Design Tools, Open Source and 3D Printer — topics that collectively have 342.2k followers on Product Hunt. The dashboard above tracks how QR3D Craft performed against the three products that launched closest to it on the same day.
Who hunted QR3D Craft?
QR3D Craft was hunted by Matias T. A “hunter” on Product Hunt is the community member who submits a product to the platform — uploading the images, the link, and tagging the makers behind it. Hunters typically write the first comment explaining why a product is worth attention, and their followers are notified the moment they post. Around 79% of featured launches on Product Hunt are self-hunted by their makers, but a well-known hunter still acts as a signal of quality to the rest of the community. See the full all-time top hunters leaderboard to discover who is shaping the Product Hunt ecosystem.
For a complete overview of QR3D Craft including community comment highlights and product details, visit the product overview.
Hi Product Hunt,
I built this because I kept seeing 3D printed QR codes that nobody could scan, and the reason was never the one people blamed.
A printer lays down a line of plastic about as wide as its nozzle. For a module - one of the little squares - to come out square instead of as a blob, two of those lines have to fit inside it. With a 0.4 mm nozzle that means 0.8 mm per module, and for a normal URL that means a piece of at least 30 mm. Make it smaller and it will not scan, no matter how good your printer is. Most generators will happily hand you a file that cannot work.
So QR3D Craft asks what you are printing with, and sizes the piece around that. You get a 3MF with the base and the code as two separate objects with their colours already assigned, so a multi-material printer prints it straight, and a single-extruder printer only needs one filament change. STL too, if your slicer prefers it.
Three things I care about:
It is free and there is no sign-up.
Nothing is uploaded. The encoder, the geometry and the 3MF writer all run in your browser - if you disconnect after the page loads, it keeps working. The link you type never leaves your machine because there is no server to send it to.
I wrote the encoder from scratch rather than pulling in a library: versions 1 to 40, the four error correction levels, Reed-Solomon, and all eight masks scored so the best one wins. It is on GitHub under MIT, together with an STL writer: github.com/matiehl97-byte/qr3d
There is also a free test kit - six tags with the same code at six different sizes, about 35 g of filament. Print it once and the smallest one that still scans is your printer's limit, which is the only number you need to size any QR piece you ever make.
Where this came from: I am in Chaco, Argentina, and I wrote the whole thing in Spanish first, for the small businesses around me that want a QR on a desk stand and have nobody to ask. The English side - the tool and all thirty-five articles - is the same pages translated by hand, not run through a translator. If you hit a sentence that reads like a machine wrote it, tell me which one and I will fix it.
Happy to answer anything - especially about the geometry, which turned out to be the interesting part.